Product Data Sheet Show all documents

Sikagard®-703 W

Sikagard®-703 W is an emulsion, ready for use, silane / siloxane combination based, water repellent impregnation.

  • Strong water repellent capability.
  • Allows the substrate to breathe (vapour permeable).
  • Treatment is usually invisible not changing the substrate aspect.
 
  • Due to the reduction of water absorption, it improves the resistance of facades to stain and dirt pick and helps the reduction of moss and lichen growth.
  • Can be over coated with suitable paints and coatings.
  • Ready to use.
  • Water based environmental friendly.
Product Data Sheet Show all documents

Usage

For making facades water repellent and protecting building against water ingress. Sikagard®-703 W can be applied on mortar, masonry, brick, stone, asbestos cement.

Advantages

  • Strong water repellent capability.
  • Allows the substrate to breathe (vapour permeable).
  • Treatment is usually invisible not changing the substrate aspect.
 
  • Due to the reduction of water absorption, it improves the resistance of facades to stain and dirt pick and helps the reduction of moss and lichen growth.
  • Can be over coated with suitable paints and coatings.
  • Ready to use.
  • Water based environmental friendly.

Packaging

2 and 5 l cans, 20 l pails.

Colour

Whitish liquid.

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

  • PV Véritas No. 1108203/2A & 2B, ageing, water vapour permeability, water absorption.
  • Belgian Building Research Institute - Determination of the water vapour resistance and the water absorption coefficient of a liquid hydrophobic product applied on a masonry clay unit. Report No DE 621X8570, LMA 5631, dated 16/12/2014
Product Information

Composition

Silane / siloxane combination.

Shelf life

12 months from date of production if stored in unopened, undamaged and original sealed packaging.

Storage conditions

Store in dry and cool conditions. Protect from moisture.

Density

~ 1.0 kg/l (at +20 °C)

 
Technical Information

Permeability to water vapour

Substrate

Substrate with Sikagard®-703 W

Sikagard®-703 W alone

Equivalent air thickness - Sd (m)

0.36

0.36

0.003

Capillary absorption

Substrate

Substrate with Sikagard®-703 W

Water absorption coefficient after 24 hours

Aw, 24 [kg/m2s0.5]

0.046

0.021

Application

Application Information

Ambient air temperature

+5 °C min. / +35 °C max.

Substrate temperature

+5 °C min. / +35 °C max.

Waiting time to overcoating

Can be overcoated with water and solvent based polymer paints - contact the paint manufacturer for details.
For overcoating with Sikagard®, SikaColor® Emulsion or solvent based coating, wait at least 5 hours after the hydrophobic impregnation.

Curing treatment

Sikagard®-703 W does not require special curing but must be protected from rain for at least 3 hours at +20 °C.
Consumption

Consumption

Dependent on substrate porosity:
On mortar: ~ 150–200 g/m2
On other porous materials: ~ 300–500 g/m2
(A test is necessary to determine the exact consumption).
Application steps

APPLICATION

Sikagard®-703 W is applied with a conventional low pressure spray, brush or roller, in various passes wet on wet from bottom up taking care not to let the product run until saturation of the substrate is reached.

 

CLEANING OF EQUIPMENT

Clean all tools and application equipment with clean water immediately after use.
Cured material can only be removed mechanically.

Documents