Product Data Sheet Show all documents

Sika® Antisol E NG

CONCRETE CURING AGENT

Sika® Antisol® E is a ready to use spray applied liquid curing agent to prevent water loss from the surface of freshly placed concrete. It forms a thin film barrier on the concrete without affecting the normal setting action.

  •  Generally improves the surface appearance
  •  Reduces cracking
  •  Ensures achievement of required strengths
  • Reduces shrinkage
  •  Controls cement hydration
  • Reduces dust formation
  •  Improves freeze / thaw resistance
  •  Alleviates other costly curing methods.
Product Data Sheet Show all documents

Usage

Large areas of exposed concrete such as:
  •  Roads and Highways
  •  Runways
  •  Roof decks
  •  Hangars and loading areas
  •  Retaining walls
  •  Pre-stressed structures
  •  Irrigation channels
  •  Civil Engineering structures
  •  Industrial floor slabs

Advantages

  •  Generally improves the surface appearance
  •  Reduces cracking
  •  Ensures achievement of required strengths
  • Reduces shrinkage
  •  Controls cement hydration
  • Reduces dust formation
  •  Improves freeze / thaw resistance
  •  Alleviates other costly curing methods.

Packaging

  •  25 kg container
  •  200 kg drum
  •  1000 kg IBC

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

According to ASTM C 309-81 type 1 class A
Product Information

Shelf life

12 months from date of production.

Storage conditions

The product must be stored in original, unopened and undamaged sealed packaging at temperatures between +5 °C and +35 °C. Protect from frost. Always refer to packaging.

Application

Consumption

Consumption

0,15–0,20 kg/m2

Consumption depends on wind speed, temperature and humidity during application.

These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.
Application steps

EQUIPMENT

Hand type backpack or motorized sprayers Suitability of equipment should be approved before using for full application.

Removal of fresh remnants from tools and application equipment can be carried out using gasoline immediately after use. Hardened / cured material can only be mechanically removed.

 

APPLICATION

Stir thoroughly before use to ensure full dispersion of solids.

Spray product in a fine mist to completely cover the concrete surface.

Maintain the pressure in the application equipment to ensure a consistent spray.

Documents