Product Data Sheet Show all documents

SikaShield® P23 PE EG 3 mm

APP MODIFIED BITUMEN WATERPROOFING MEMBRANE REINFORCED WITH COMPOUND BASE

SikaShield® P23 PE EG 3 mm Bituminous Waterproofing Membrane made of polymer modified bitumen waterproofing membrane of the highest quality. Sikashield P23 is modified by APP , thus guaranteeing superior performance under various conditions.is reinforced with glass fiber mat & polyester yarn which provides high mechanical and dimensional stability

  • Reinforcement provides the membrane with dimensional stability.
  • Improved chemical resistance to acidic and alkaline solutions.
  • Environmentally friend.
  • Enhanced thermal resistance under a wide range of temperature fluctuation.
Product Data Sheet Show all documents

Usage

▪ Vapor barrier sheet.
▪ Applications subject to low mechanical stress.
▪ Waterproofing for wet areas, mechanical rooms,and terraces  

Advantages

  • Reinforcement provides the membrane with dimensional stability.
  • Improved chemical resistance to acidic and alkaline solutions.
  • Environmentally friend.
  • Enhanced thermal resistance under a wide range of temperature fluctuation.

Packaging

Roll size: 1.0 m (roll width) x 10.00 m (roll length).

Product Details

Product Information

Shelf life

24 months from the production date

Storage conditions

The Product must be stored in original unopened and undamaged packaging in dry conditions and temperatures between +5 °C and +35 °C.
Store in a vertical position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to packaging.

Effective thickness

3,0 mm ± 5 %(EN 1849)
Technical Information

Dimensional stability

Longitudinal± 0.1%
Transverse± 0.1%

( EN 1107-1)

Tear strength

Longitudinal≥ 350 N
Transverse

≥ 250 N

( ASTM D-5147)

Watertightness

Method B: 24 hours at 60 KPa Pass(EN 1928)

Flow resistance

120 ºC

(EN 1110)

Flexibility at low temperature

0 ºC

(EN1109)

Application

Application steps

SUBSTRATE QUALITY

SYSTEM DESIGN

Consider the following when designing the roof system:

  • The supporting structure must be of sufficient structural strength to support all new and existing layers of the roof build-up.

  • The complete roof system must be designed to withstand and be secured against wind uplift loadings.

  • The wind uplift resistance of the adhered roofing assembly is limited by the adhesion strength of the Product to the substrate.

SUBSTRATE CONDITION

The substrate surface must be uniform, firm, smooth and free of any sharp protrusion or burrs, clean, dry, free of grease, laitance, oil, dust and loosely adhering particles.

SUBSTRATE PREPARATION

PRIMING

Primer selection

Note: For information on selecting the appropriate primer, contact Sika technical service.

  • Apply the appropriate Sika® primer with the required consumption onto the prepared dry surface.
    Note: Refer to the individual Product Data Sheet of the primer.
  • Allow the primer to dry before membrane installation.

Documents